How to protect your vehicles identity

Choose a product

Place an order

Theft facts

Article links

BMW Vehicle License Plate Screws

Most BMW cars and SUVs will require our kit PN 400920.

Our standard screw length is 16mm, (about 5/8").

If you have a thick licence plate frame, our standard 16mm screws should be fine in most applications.

Some models require a shorter screw for the back plate to prevent the screw from damaging the paint behind the license plate. Please check the length required before ordering.

If your current screw length is shorter, order our PN 400922.

Screw length of PN 400922 is 12mm (about 1/2").

If neither of these lengths seem correct, measure the screw length (from the bottom of the screw head to the tip) and contact us. We can probably supply the screw length you need.

Front plate note: Some states or provinces require a front license plate. If your vehicle has a front plate, check that the screws used on the front are the same as the back. If not, contact us and we can supply a mixed screw set.

Continue to purchase page

It only takes a screwdriver and 30 seconds to steal your vehicles identity!


Statement of ownership: is a subsidiary of Redline Technical Group, Inc., an Arizona corporation. This site is dedicated to the prevention of license plate theft.


You need to protect your vehicles' identity too!

See our other products at